APC Smart-UPS On-Line uninterruptible power supply (UPS) Double-conversion (Online) 5 kVA 4500 W 10 AC outlet(s)

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime
Allows additional run time to be quickly added as needed.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Network manageable
Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

SmartSlot
Customize UPS capabilities with management cards.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial connectivity
Provides management of the UPS via a serial port.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable
Provides temporary battery power when the utility power is out.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Technical details

• Sustainability certificates: RoHS, ENERGY STAR

Ports & interfaces

• AC outlet types: C13 coupler, C19 coupler
• Power plug: Terminal
• AC outlets quantity: 10 AC outlet(s)
• Number of output IEC jumpers: 2
• USB port: Yes
• Serial interface: Yes
• Serial interface type: RJ-45
• SmartSlot: Yes

Weight & dimensions

• Width: 432 mm
• Depth: 719 mm
• Height: 130 mm
• Weight: 54.4 kg
• Package width: 610 mm
• Package depth: 960 mm
• Package height: 330 mm
• Package weight: 66.9 kg

Operational conditions

• Operating temperature (T-T): 0 - 40 °C
• Storage temperature (T-T): -15 - 45 °C
• Operating relative humidity (H-H): 0 - 95%
• Storage relative humidity (H-H): 0 - 95%
• Operating altitude: 0 - 3000 m
• Non-operating altitude: 0 - 15000 m

Packaging data

• Rack mount kit: Yes
• Bracket: Yes
• Temperature sensor: Yes
• Quick installation guide: Yes
• Warranty card: Yes

Battery

• Battery technology: Sealed Lead Acid (VRLA)
• Battery capacity: 845 VAh
• Typical backup time at full load: 4 min
• Typical backup time at half load: 11.8 min
• Battery life (max): 5 year(s)
• Battery recharge time: 1.5 h
• Hot-swap battery: Yes
• Automatic battery test: Yes
• Cold start: Yes
• Replacement battery cartridge: APCRBC140

Other features

• Packaging content: Web/SNMP Management Card

Design

• Form factor: Rackmount
• Product colour: Black
• Rack capacity: 3U
• Display type: LCD
• International Protection (IP) code: IP20
• Certification: REACH, CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, NOM, VDE

Features

• UPS topology: Double-conversion (Online)
• Output power capacity: 5 kVA
• Output power: 4500 W
• Waveform: Sine
• Input operation voltage (min): 160 V
• Input operation voltage (max): 275 V
• Input frequency: 40 - 70 Hz
• Output operation voltage (min): 220 V
• Output operation voltage (max): 240 V
• Output frequency regulation: 50/60 Hz
• Surge energy rating: 480 J
• Efficiency: 94.1%
• Crest factor: 3:1
• Emergency Power Off (EPO): Yes
• Output voltage Total Harmonic Distortion (THD): 3%
• Noise level: 55 dB
• Surge protection: Yes
• Audible alarm(s): Yes
• Auto-restart: Yes

Logistics data

• Products per pallet: 6 pc(s)
• Harmonized System (HS) code: 85078000

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)